AXIS M 25 EMC (+W)

Benefits

• VariSpread V18

  AXIS M 25 with manual CDA feed point adjustment has 18-fold part-width section control as standard. VariSpread V18 switches nine part-width sections per side remotely via the metering slide positions using quantity adjustment. Spreading from outside to inside and gap spreading are also possible.

• Rust-through guarantee

  

  AXIS fertiliser spreaders from RAUCH are characterised by a high-quality, durable ProTect double powder coating.
  The optimum protection against mechanical stress, UV light, salts and acids guarantees a long service life of the construction.
  RAUCH gives a 6-year guarantee against rust-through on all AXIS fertiliser spreaders. 
  
  Activate the rust-through warranty on your new AXIS fertiliser spreader within 3 months of delivery of the new machine by scanning the QR code on the warranty sticker (on the machine),
  register the serial number of your new AXIS machine, your address information* in the online portal and then click on ‘Submit application’ - it's easy!
  
  Benefit from the proverbial RAUCH quality for many years to come.

  _{*The registration must be completed by the end customer within 3 months of delivery of the new machine to the end customer (proof may be required)}

• ISOBUS

  Utilising synergies - increasing efficiency

  

  Innovative RAUCH ISOBUS technology for the ISOBUS fertiliser spreaders enables familiar operation with existing ISOBUS operating terminals from a wide range of suppliers and machines.

  Find out more about the ISOBUS terminals here

• EMC®-2

  The intelligent online automatic dosing system with e-bike technology

  

  AXIS ^EMC® measures and controls the current application rate fully automatically on the left and right metering slides separately. State-of-the-art magnetostriction torque sensors measure the drive torques of the two spreading discs without contact and with high precision, thereby permanently regulating the exact metering slide position for each side separately. ^EMC® uses the magnetostriction e-bike technology from renowned system partner Schaeffler FAG, which has proven itself millions of times over.

  High precision, elegant ease of use

  For the driver, this means simply entering the spread rate and working width and starting to spread. The spread rate is adjusted in seconds depending on the current fertiliser trickle properties and the driving speed.

  ^EMC® advantage

  In contrast to spreaders with control via load cells, ^EMC® doses the left and right sides separately. This enables greater metering precision and accurate lateral distribution.

  ^EMC® recognises and compensates for quality-related fertiliser flow rate fluctuations much faster than conventional weighing spreaders with weighing cells.

  ^EMC® doses precisely and reliably even under extreme vibrations.

  ^EMC® doses with high precision even on slopes.

  ^EMC® measures the applied quantities in kg with the same high precision as a scale for your documentation.

  The intelligent EMC® metering ^slide control automatically recognises one-sided blockages and obstructions.

  ^EMC® precisely measures and controls the different application rates on the right and left when spreading with VariSpread in wedge-shaped areas.

  ^EMC® measures and controls the different spread rates on the right and left when fertilising with partial area precision from application maps or with N-sensors.

• CDA spreading technology | manual

  Coaxial metering and feed point adjustment, CDA spreading technology for short

  

  The CDA spreading technology enables simple and precise adjustment of fertiliser type, quality, working width and dosing quantity directly on the control terminal - quickly and safely with just one turn. With AXIS spreaders, there is no need to adjust the spreader vanes. Fine metering is infinitely variable from 3 kg/ha via a clear scale. The exclusive DfC scale from RAUCH makes it easier to adjust the quantity. All relevant settings are available online in the setting chart or in the RAUCH app.

• High-Speed-Servos

  

  The big SpeedServo advantage:

  The adjustment speeds of the SpeedServos are 2.5 times higher compared to the predecessor spindle motor models. This enables superior reaction speeds and new performance dimensions for AXIS M EMC ISOBUS spreaders and AXIS H EMC spreaders for fully automatic fertiliser metering with EMC, headland spreading with OptPoint, section-specific spreading with application maps and part-width spreading with Section-Control.

  Despite significantly lower power consumption, SpeedServos enable up to three times higher actuating forces than comparable spindle motors. The superior energy efficiency creates ideal conditions for use in ISOBUS machines, as the ISOBUS standard limits the electrical power.

  SpeedServos can also be protected much more efficiently against dust and dirt, as there is no longer a sensitive, extendable lifting rod. The effective, long-term sealing against moisture and dust and the simple, robust SpeedServo design enable extra-long service lives for the valuable electronic components.

• M-Drive

  M-Drive: wartungsfreie Getriebetechnologie mit Überlastschutz

  

  The innovative M-Drive for the spreading discs and the slow-running, fertiliser-friendly agitators is maintenance-free for years. All shafts and angular gearboxes run in an oil or grease bath and are protected from fertiliser dust, dirt, moisture and mechanical damage by a robust frame construction.

  Unique in fertiliser technology: AXIS has overload protection systems that protect the entire gearbox unit, including the fertiliser-friendly agitators, from overloading due to blockages, incorrect operation or hard-shifting PTO shafts.

• W | Residual quantity scale

  Always keep an eye on the remaining quantity

  

  The scale integrated in the spreader reliably displays the remaining fertiliser quantity in the hopper. You can also choose to display the possible remaining area or the remaining distance to be spread in metres. This allows overloading operations to be planned at the ideal time.

  The residual quantity scale "W" is part of the standard equipment of all AXIS spreaders with weighing frame "+W".