AXIS M 20.2

1,000 – 2,300 l Hopper capacity

M-Drive Drive

12 – 36 m Working width

Compact and professional two-disc fertiliser spreader

AXIS M 20.2 offers professional spreading technology especially for future-oriented businesses. The low filling height of the AXIS M 20.2 makes it ideal for filling dump trucks. With its unique performance potential, it sets new standards for professional agriculture.

Model variants AXIS M 20.2

AXIS M 20.2 K	Hydraulic single slide actuator system with two single-acting cylinders
AXIS M 20.2 D	with double-acting hydraulic slide actuators
AXIS M 20.2 R	Hydraulic single slide valve actuation with two single-acting cylinders that close hydraulically and open by spring pressure. With a two-way valve on the hoses, both gate valves can be actuated by only one tractor control unit. To actuate one gate valve individually, simply close one hydraulic hose via the two-way valve.
AXIS M 20.2 C	with electric metering slides with E-Click
AXIS M 20.2 Q	with QUANTRON-A speed-dependent, electronic fertiliser metering

Benefits

M-Drive

M-Drive: wartungsfreie Getriebetechnologie mit Überlastschutz

AX-Drive - Animation

The innovative M-Drive for the spreading discs and the slow-running, fertiliser-friendly agitators is maintenance-free for years. All shafts and angular gearboxes run in an oil or grease bath and are protected from fertiliser dust, dirt, moisture and mechanical damage by a robust frame construction.

Unique in fertiliser technology: AXIS has overload protection systems that protect the entire gearbox unit, including the fertiliser-friendly agitators, from overloading due to blockages, incorrect operation or hard-shifting PTO shafts.
QUANTRON-A | AXIS

The spreader thinks for itself!

QUANTRON-A regulates the opening position of the metering slides and thus the flow rate depending on the forward speed and the specified application rate.

With AXIS, the metering slides are adjusted quickly and precisely using the patented SpeedServo actuating cylinders. A 2.5-fold increase in adjustment speed, significantly increased efficiency and optimised sealing against moisture and dust are the key advantages of this technology.

The preselected application rate is always maintained when the forward speed varies. The correct slider position is always approached based on the preset flow factor or the flow factor determined by a calibration test. QUANTRON-A impresses with its large, clear display and logically structured menu navigation. All functions can be operated remotely, conveniently and safely with just one hand.

Find out more about QUANTRON-A here
Slider variant

The right shutter slide variant for every tractor

The metering slides are elegantly opened or closed separately on the left and right side by mechanical, hydraulic or electric remote control. Even wedge-shaped areas can be spread with partial width precision.

Slider variants at a glance
CDA spreading technology | manual

Die coaxiale Dosier- und Aufgabepunktverstellung, kurz CDA-Streutechnik

The CDA spreading technology enables simple and precise adjustment of fertiliser type, quality, working width and dosing quantity directly on the control terminal - quickly and safely with just one turn. With AXIS spreaders, there is no need to adjust the spreader vanes. Fine metering is infinitely variable from 3 kg/ha via a clear scale. The exclusive DfC scale from RAUCH makes it easier to adjust the quantity. All relevant settings are available online in the setting chart or in the RAUCH app.
VariSpread V8

AXIS M 20.2/30.2 with QUANTRON-A and manual CDA feed point adjustment are equipped with 8-fold part-width section control as standard. With this alternative to the VariSpread pro, four part-width sections per side can be realised by remotely adjusting the metering slide positions via a quantity adjustment.
Rust-through guarantee

AXIS fertiliser spreaders from RAUCH are characterised by a high-quality, durable ProTect double powder coating.
The optimum protection against mechanical stress, UV light, salts and acids guarantees a long service life of the construction.
RAUCH gives a 6-year guarantee against rust-through on all AXIS fertiliser spreaders.

Activate the rust-through warranty on your new AXIS fertiliser spreader within 3 months of delivery of the new machine by scanning the QR code on the warranty sticker (on the machine),
register the serial number of your new AXIS machine, your address information* in the online portal and then click on ‘Submit application’ - it's easy!

Benefit from the proverbial RAUCH quality for many years to come.

_{*The registration must be completed by the end customer within 3 months of delivery of the new machine to the end customer (proof may be required)}
E-Click

RAUCH offers simple operating electronics with E-Click

The special feature of E-Click: The electric metering slides can be conveniently operated separately on the left and right by toggle switch. A control diode indicates the current slide position. This minimises operating errors.

The E-Click control terminal is elegantly connected to the fertiliser spreader by cable. There is no need to connect the hydraulic hoses. High-quality, dust and splash-proof actuators ensure a high level of operating comfort and a long service life for the investment.

The E-Click electric shutter slide actuation is particularly suitable for smaller tractors with few hydraulic connections.

Tools

Fertiliser chart

Operating manuals

Installation instructions

Dealer service

Accessories

Hopper cover and AP drive

Hopper cover and AP drive

The prefect protection against moisture and dirt from the tyres.
All AXIS hopper covers open over the entire filling area thanks to the high-quality "convertible-like folding" feature.

So filling can carry on, trouble-free, as usual. An opening mechanism with a long lever arm makes it easy to open and close the hopper cover.

Even with a hopper cover, the fill level can still be checked quickly and easily from the tractor cab via the window areas in the cover.

Option:

On request, the hopper cover can be operated remotely from the cab via the electric AP-Drive (only with AXIS of the .2 series with Quantron-A or ISOBUS).

Parking rollers ASR 25

Parking rollers ASR 25

Enjoy more flexibility when it comes to spreader attachments and dismantling with the large ASR 25 parking rollers. A quick-release coupling system allows the rollers to be removed at any time or mounted in transport position.

AXIS lighting with warning signs

High-quality LED headlights, integrated in the warning signs, ensure more safety on the road.

Front lighting

High-quality LED headlights, integrated in the warning signs, provide a good view of the tractor.

GPS speed sensor

GPS speed sensor

In order to be able to regulate spreading according to the driving speed, the QUANTRON-A and QUANTRON-K2 scatter computers, and the ISOBUS display all require a speed signal. This usually comes via the 7-pin signal socket or the ISOBUS from the tractor unit. If the tractor itself is not equipped with this signal, either a wheel sensor must be retrofitted or you can use this GPS speed sensor.

A GPS signal in combination with an acceleration sensor generates a high-precision speed signal. This is especially recommended if the spreader is used in combination with several tractors or is also shared by different companies.

Another great advantage of this is that the slip of the tractor tyres in wet conditions or slopes does not matter and does not adversely affect the spreading result.

GPS control with CCI 800

GPS control with CCI 800

In order to use the QUANTRON-A to automatically switch part-width sections and headlands via GPS or to scatter application maps, the QUANTRON-A is connected to the CCI.800 terminal via a serial interface.

In this case, the CCI.800 is not used as an ISOBUS terminal, but as a GPS terminal that, in combination with a GPS receiver, switches part-width sections via SectionControl or processes application maps via the TaskController.

Information about the CCI 800 can be found here

Limited border spreading GSE AXIS/AXENT

The GSE 30 and GSE 60 enable sharp-edged border spreading on the left and right side directly on the field boundary with half-side spreading. The distance to the border can be varied between 0 to 3 m. GSE 30 is the thrower shield for AXIS 20.2 / 30.2. GSE 60 is suitable for use with AXIS 50.2 and AXENT.

Optionally, GSE 30/60 can be remotely controlled hydraulically using the FHD 30-60 remote control via a double acting tractor control valve.

Another option is the GSE sensor. This shows the current status of the GSE in the operating screen of the software.

Limited border spreading Telimat AXIS

Limited border spreading Telimat AXIS

TELIMAT T25/T50

TELIMAT enables precise, hydraulically remote-controlled edge and border spreading right from the first tracks. The double-adjustable spreading compartments redirect the fertiliser to fulfil the requirements of the European environmental standard.

Without the need for stopping and dismounting, the Telimat T25 swings up and down on the AXIS 20 and 30 via a single-acting tractor control valve. AXIS M 50.2 W ISOBUS is equipped with a TELIMAT T50 remote control as standard.

Level sensors | AXIS

Level sensors | AXIS

For each AXIS with electronics one level sensor can be optionally fitted to the filling sieve per container side. These sensors give off a warning in the display should the level on the respective side get too low. This accessory is particularly interesting for machines without remaining quantity scale or for spreaders with section control, which work in a very one-sided manner, and it also helps to avoid flaws.

Practical test set

Practical test set

More safety when spreading

RAUCH PPS 5 Practical test set permits cross-distribution to be checked and corrected quickly and easily in the field. This provides even more reliability and accuracy during spreading, particularly with fertilisers of lower quality, problematic discharge properties or unknown origin.

In combination with the clear and comprehensible AXIS-CDA tuning logic, corrections are amazingly easy and secure.

PPS 5 components:

10 collecting trays
5 measuring cylinders
1 roller tape measure
clear, logical operating instructions.

Dirt deflector with quick release fastener

Dirt deflector with quick release fastener

A practical idea makes it all the way to series production. With the assembling tool located on the spreader, the three attachment points of the mud flaps can be released quickly and easily with a quarter turn. So cleaning the machine quickly and carefully is a snap.

SpreadLight | AXIS

Modern GPS-controlled OptiPoint headland management systems and VariSpread section controls make precise fertiliser spreading possible - even at night. So far, however, it has been very difficult for the driver to visually check the individual spreader functions while spreading in the dark. In addition, obstacles in the spreading area pose a risk at night.

Thanks to the SpreadLight work lights, RAUCH has solved these problems. Modern, powerful LED work lights directly above the two spreader discs of the fertiliser spreader illuminate the spread fans on the left and right side.

The driver has the spread fan in full view thanks to SpreadLight. Possible incorrect settings or clogging at the dispensing gates are recognised immediately. Moreover, the operator can respond more quickly to difficult-to-detect obstacles or danger spots in the outer spreading area in the dark, especially when it comes to wide spreading widths.</p<p>Unlike the tractor's work lights, SpreadLight is specifically aimed at the spreading fan. The fertiliser granules thereby reflect the intensive LED light.

As simple as it is convenient, SpreadLight is remotely controlled by the ISOBUS terminal via a touchscreen. The operator can choose whether the headlamps are permanently lit or automatically switch off and on in the headland in order to avoid blinding oncoming traffic on the road. SpreadLight can be retrofitted as an option for all mechanical and hydraulically driven RAUCH AXIS.2 ISOBUS fertiliser spreaders.

Telimat sensor

The optional AXIS Telimat sensor shows in the display of the QUANTRON-A or the ISOBUS terminal whether the Telimat thrower shield is in the ready position. It happens again and again that not only smartphone-happy farmers forget to raise the Telimat again after limited border spreading, thereby causing errors in the spreading results. Just one look at the display and you will be reminded of the Telimat's position.

6 year warranty against rusting

AXIS fertiliser spreaders are characterised by their high-quality, durable ProTect double powder coating. Perfect protection against mechanical stress, UV light, salts and acids guarantees the construction will last a long time. RAUCH now offers a 6 years warranty against rusting on all AXIS fertiliser spreaders manufactured after September 2017.

Simply activate the anti-rust warranty for your new AXIS spreader with the barcode on the warranty sticker. Benefit from the legendary RAUCH quality for many years to come.

To the online form

Ejection discs

Everything revolves around precision.

	Ejection discs	Working width	Beschreibung
	S2	Working width: 12-18m
	S4	Working width: 18-28 m
	S6	Working width: 24-36 m

* Coated spreader vanes with VXR plus

Hopper extensions

The flexible attachment system enables optimum adjustment of the hopper volume.

Hopper extension	L 603, 3-seitig	L 800	XL 1103, 3-seitig	XL 1300

Additional volume [ l ]	600	800	1,100	1,300
Total volume [ l ]	1,600	1,800	2,100	2,300
Additional filling height [ cm ]	0	26	23	38
Filling width [ cm ]	230	230	270	270
Additional weight [ kg ]	30	45	60	65

Technical data and equipment

Model variant	AXIS M 20.2 K	AXIS M 20.2 D	AXIS M 20.2 R	AXIS M 20.2 C	AXIS M 20.2 Q
Basic machine
Working width [ m ]	12 – 36	12 – 36	12 – 36	12 – 36	12 – 36
Hopper volume [ l ]	1,000	1,000	1,000	1,000	1,000
Max. capacity [ kg ]	2,300	2,300	2,300	2,300	2,300
Container size [ cm ]	240 x 130	240 x 130	240 x 130	240 x 130	240 x 130
Filling height [ cm ]	95	95	95	95	95
Filling width [ cm ]	230	230	230	230	230
Empty weight [ kg ]	300	300	300	300	300
Tractor attachment	Three point category II/III	Three point category II/III	Three point category II/III	Three point category II/III	Three point category II/III
Drive	M drive: Universal drive shaft with ratchet safety clutch 540 rpm	M drive: Universal drive shaft with ratchet safety clutch 540 rpm	M drive: Universal drive shaft with shear bolt 540 rpm	M drive: Universal drive shaft with ratchet safety clutch 540 rpm	M drive: Universal drive shaft with ratchet safety clutch 540 rpm
Metering
Slide actuation/quantity regulation	Hydraulic metering slide	Hydraulic metering slide	Hydraulic metering slide	Electrical metering slide	Electronic metering slide without mass flow control
Servomotors	-	-	-	Slide actuation elec. Linear actuator	Slide actuation elec. HighSpeed servos
Variable Rate Control	No	No	No	No	Yes
Electronics	-	-	-	EN- Bedienung E-Click	QUANTRON-A spreading system
Section control	VariSpread V2 partial width controller	VariSpread V2 partial width controller	VariSpread V2 partial width controller	VariSpread V2 partial width controller	VariSpread V8 partial width controller
Limited border spreading	Limited border spreading with TELIMAT, Limited border spreading with GSE	Limited border spreading with TELIMAT, Limited border spreading with GSE	Limited border spreading with TELIMAT, Limited border spreading with GSE	Limited border spreading with TELIMAT, Limited border spreading with GSE	Limited border spreading with TELIMAT, Limited border spreading with GSE

Innovative Fertiliser spreader
– This might also be of interest to you

AXIS M 30.2

1,400 – 3,200 l Hopper capacity

M-Drive Drive

12 – 42 m Working width

AXIS M 20.2

Disc spreaders with universal drive shaft

Compact and professional two-disc fertiliser spreader

Model variants AXIS M 20.2

Benefits

M-Drive

QUANTRON-A | AXIS

Slider variant

The right shutter slide variant for every tractor

CDA spreading technology | manual

VariSpread V8

Rust-through guarantee

E-Click