Benefits

• Multi-disc system

  Ingenious solutions for more spreading precision

  

  With the tried-and-tested multi-disc system, which gives the MDS fertiliser spreader its name, everything revolves around the spreading discs. The simple adjustment of the length and angle of the spreading vanes enables the fertiliser spreader to be precisely adapted to different spreading materials and working widths: precise and reliable in normal fertilisation, late fertilisation and for yield-optimised spreading at the edge of the field (right and left).

  This means: high precision fertiliser distribution and the achievement of exact spreading patterns for all types of fertiliser, fine seeds and slug pellets.

  Thanks to the clearly visible, three-dimensional position indicator, the spreading vanes can be easily and clearly adjusted in length and angle, even after long periods of use.

• E-Click

  RAUCH offers simple operating electronics with E-Click

  

  The special feature of E-Click: The electric metering slides can be conveniently operated separately on the left and right by toggle switch. A control diode indicates the current slide position. This minimises operating errors.

  The E-Click control terminal is elegantly connected to the fertiliser spreader by cable. There is no need to connect the hydraulic hoses. High-quality, dust and splash-proof actuators ensure a high level of operating comfort and a long service life for the investment.

  The E-Click electric shutter slide actuation is particularly suitable for smaller tractors with few hydraulic connections.

• Direct-Flow-Control

  Precise, predictable dosing

  

  The spread rate is preselected on the large, quantity-proportional Direct Flow Control (DfC) scale, infinitely variable from 3 kg/ha. The DfC scale makes it possible to change the exact application rate without additional aids.

  Quite simply:
  10% higher scale value means 10% higher application rate. This simplifies the precise adjustment of the optimum application rate from one field to another.

• Gearbox and spreading technology

  Robust, durable and maintenance-free

  

  The heart of the MDS spreader is the maintenance-free oil bath gearbox. All shafts are mounted on two bearings. The agitator
  shaft is made of high-quality stainless steel. Even after many years of hard use, no oil change is necessary.

  Decisive factors for the quality of the spread pattern:

  A slowly rotating agitator finger (180 rpm) ensures a trouble-free, constant supply of fertiliser that is gentle on the fertiliser.

  The special metering slide shape enables precise metering of very small (3 kg/ha) and large quantities of nutrients and is therefore also suitable for spreading slug pellets, fine seeds and rice.

  The fertiliser is gently transferred to the spreader vane via the metering channel with brushes. The special notches on the spreading vanes ensure that even the most pressure-sensitive fertiliser types retain their spreading properties.

  The high disc speed (980 rpm) accelerates the fertiliser grain to an optimum discharge speed. The high discharge energy ensures safe flight behaviour and is crucial for precise fertiliser distribution.

• Single-chamber principle

  MDS shows its strengths in daily use

  

  The MDS single-chamber hopper system is ideal for use in hilly or small-structured terrain:< /p>

  No one-sided emptying of the hopper, even with the metering slide closed on one side. The spreading material can be used right down to the last grain. This saves time and increases efficiency.

• Slider variant

  

  The right shutter slide variant for every tractor

  The metering slides are elegantly opened or closed separately on the left and right side by mechanical, hydraulic or electric remote control. Even wedge-shaped areas can be spread with partial width precision.

  Slider variants at a glance

• QUANTRON-A | MDS

  Dosierelektronik in Perfektion

  

  QUANTRON-A regelt die Öffnungsstellung der Dosierschieber und damit die Durchflussmenge in Abhängigkeit von der Fahrgeschwindigkeit und der vorgegebenen Ausbringmenge.

  Bei variierender Fahrgeschwindigkeit bleibt die vorgewählte Ausbringmenge immer erhalten. Mit großem, übersichtlichem Display, einer logisch aufgebauten Menüführung und einer USB-Schnittstelle überzeugt QUANTRON-A.

  Alle Funktionen lassen sich elektrisch fernbedient, komfortabel und sicher mit nur einer Hand ausführen. MDS mit QUANTRON-A bietet nicht nur eleganten Bedienkomfort sondern steigert die Präzision und die Effizienz in der Ausbringung wertvoller Düngergranulate.

  Informationen zu QUANTRON-A erhalten Sie hier

• Rührwerke | MDS

  

  MDS-Streuer sind mit korrosionsfreien Rührwerken ausgestattet

  RAUCH liefert seit Oktober 2014 die komplette MDS-Baureihe mit neuen korrosionsfreien Rührwerksköpfen aus. Der neue MDS-Rührkopf wird aus hochwertigen Verbundkunststoffen gefertigt. Sowohl in der Abriebfestigkeit als auch bei der Korrosionsbeständigkeit setzt das Kunststoff-Rührwerk neue Maßstäbe gegenüber der abgelösten Gusseisen-Variante. Rostflecken oder an der Rührwerkswelle festkorrodierte Rührköpfe gehören damit der Vergangenheit an. Die bekannten RAUCH-Rührfinger werden nach wie vor aus Werkzeugstahl gefertigt.